David Ingold

David Ingold

David Ingold is a graduate of The Ohio State University School of Architecture and a member of the Construction Specifications Institute (CSI) with Construction Documents Technology (CDT) certification. With more than 18 years of experience, David brings a broad knowledge base and understanding of design and construction to a wide variety of project types. He is an accomplished senior project administrator with experience in developing all phases of architectural documents. David has performed key responsibilities as a project leader, specifications writer, and coordinator for projects of all types and complexities including low- and high-rise condominiums, sporting facilities, higher education and government research laboratories, manufacturing facilities, wastewater treatment plants, parking garages, and campus master plans. David’s greatest aspiration is to provide construction administrative services to fully execute project designs.

Lake Point Tower, Chicago, IL

Mitigating Elevator Noise in Multifamily Residential Buildings

Thu, Feb 02, 2012

Today’s modern mid rise and high riseluxury condominiumsand apartment buildings offer numerous amenities to attract potential owners. They can offer spectacular vistas through floor to ceiling walls of glass, high end finishes on the floor, gourmet style kitchens with all the modern features one could ever want, and a master bedroom suite that offers a tranquil and quiet place to escape. In these building types, elevators become a necessary component for vertical circulation to access the floors. For those residences that are adjacent to the elevator equipment room or the elevator hoistway, the noise and vibration caused by the operation of the elevator can be a potential source of sound intrusion. Because today’s buildings are constructed with lightweight materials, and because there is a need to generate maximum useable square footage, sound transmission issues are compounded. All this combined can result in unsatisfactory living conditions for tens of thousands who live in condominiums or apartments.

Metal Stud Wall System Anatomy

Metal Stud Wall System Anatomy

Wed, Feb 02, 2011

Concrete masonry units(CMU) have long been considered the ideal backup material for brick facing; however, because of increasing installation costs, CMU backup systems have given way to metal stud backup systems. Brick veneer with metal stud backup walls, because they are a very cost effective and versatile wall assembly, are very commonly seen in today’s commercial buildings. The original exterior metal stud wall systems of the 1970’s were simple. They consisted of metal studs at 16 or 24 inches on center, with fiberglassbatt insulationhaving an integral vapor barrier placed in between. Gypsum board sheathing was placed on each side, and 15 pound felt paper was installed over the exterior sheathing. This system eventually would fail and allow air and moisture to enter the building, degrading the insulation and thus the R-Value of the wall, not to mention causing other significant problems.

Extruded Polystyrene (XPS): Improved Wall Performance

Extruded Polystyrene (XPS): Improved Wall Performance

Thu, Feb 02, 2012

A building's wall system must constantly fight the invasion of rain, air, vapor and thermal attacks.The wall's ability to provide a barrier to each of these elements relies upon the use of appropriate materials, installed in the correct sequence. There is no such thing as aperfect wallsystem; however, a wall system that performs with greater efficiency using new efficient materials is achievable.

Guardrails: Design Criteria, Building Codes, & Installation

Guardrails: Design Criteria, Building Codes, & Installation

Thu, Feb 02, 2012

Designing and Installing a Safe System
Almost every commercial and public building, whether it is an office building, sports arena, place of worship, or school building, contains a guardrail system.Guardrailsystems are installed to provide safety and protection for the building occupants and are placed at or near the outer edges, of flights ofstairs, ramps, landings, platforms, balconies and accessible areas of roofs. They will also be found at the perimeter edge of any opening or accessible surface, such as an opening for a stairway, or at a location where operating conditions require limited access to a designated area in order to guard against accidental falls.

Demolition Best Practices

Demolition Best Practices

Thu, Feb 02, 2012

Demolition projects can range from small, simple jobs to complicated undertakings that require sophisticated and detailed planning. Site conditions can vary significantly, and there is always a degree of imprecision to the wrecking of the building itself. For typical building demolition and site improvements the most common procedure is to use heavy mechanical equipment such as wrecking balls, excavation hoes, grapples, pulverizers, crushers, and hydraulic breakers and shears. Several factors need to be considered prior to and during demolition, including the scheduling of demolition activities, protecting the site (especially important with occupied structures), and dealing with hazardous materials.

Bing Thom's Arena Stage Expansion

Bing Thom's Arena Stage Expansion

Tue, Jun 15, 2010

I recently had the opportunity to visitBing Thom’smuch talked about and long-awaitedArena Stagerenovation and expansion project in Washington, D.C. With slightly more than two years of construction completed, the $125 million, 200,000 square foot project is in the final stages and is due to open its doors on schedule for the inaugural 2010/11 theater season later this fall.

Demolition Best Practices

Demolition Best Practices

星期二,4月13, 2010

Demolition projects can range from small, simple jobs to complicated undertakings that require sophisticated and detailed planning. Site conditions can vary significantly, and there is always a degree of imprecision to the wrecking of the building itself. For typical building demolition and site improvements the most common procedure is to use heavy mechanical equipment such as wrecking balls, excavation hoes, grapples, pulverizers, crushers, and hydraulic breakers and shears. Several factors need to be considered prior to and during demolition, including the scheduling of demolition activities, protecting the site (especially important with occupied structures), and dealing with hazardous materials.

Guardrails: Design Criteria, Building Codes, & Installation

Guardrails: Design Criteria, Building Codes, & Installation

星期二,2010年2月16日

Designing and Installing a Safe System
Almost every commercial and public building, whether it is an office building, sports arena, place of worship, or school building, contains a guardrail system.Guardrailsystems are installed to provide safety and protection for the building occupants and are placed at or near the outer edges, of flights ofstairs, ramps, landings, platforms, balconies and accessible areas of roofs. They will also be found at the perimeter edge of any opening or accessible surface, such as an opening for a stairway, or at a location where operating conditions require limited access to a designated area in order to guard against accidental falls.

Extruded Polystyrene (XPS): Improved Wall Performance

Extruded Polystyrene (XPS): Improved Wall Performance

Mon, Feb 08, 2010

A building's wall system must constantly fight the invasion of rain, air, vapor and thermal attacks.The wall's ability to provide a barrier to each of these elements relies upon the use of appropriate materials, installed in the correct sequence. There is no such thing as aperfect wallsystem; however, a wall system that performs with greater efficiency using new efficient materials is achievable.

Racing to a Quieter Solution: Cooper Stadium

Racing to a Quieter Solution: Cooper Stadium

结婚,2月3日,2010

The residents and businesses of Columbus, Ohio have another chance to capitalize on an incredible opportunity. TheColumbus Dispatchrecently reported that NASCAR racer Jeff Gordon will team up with Arshot Investment Corp to propose plans for a racing facility at the existing vacant Cooper Stadium. Cooper Stadium has been vacant since the Columbus Clippers moved to their new home at Huntington Park at the end of the 2008 season. There is no doubt this project will provide the economic jump-start that this part of town needs.

Page 1 of 2